Send inquiry
DIN 2185 MORSE TAPER SLEEVES WITH TANG
Drill Sleeves or Reduction sleeves are used to adapt smaller Morse taper shank tools to larger machine spindles. These are available in two types.
A-Grade: - Made from high grade carbon Steel. Completely hardened & Precision ground internally & externally.
Workshop Grade: - Made from Carbon Steel. Fully ground on the outside & having a reamed finish on the inside.
Gost 18258 center sleeve stock available.
Drill Sleeves or Reduction sleeves are used to adapt smaller Morse taper shank tools to larger machine spindles. These are available in two types.
A-Grade: - Made from high grade carbon Steel. Completely hardened & Precision ground internally & externally.
Workshop Grade: - Made from Carbon Steel. Fully ground on the outside & having a reamed finish on the inside.
Gost 18258 center sleeve stock available.
| Model MS.NO.S- MS.NO.T | D(mm) | d(mm) | L(mm) | Wt(kg) | Accuracy |
| 1-0 | 13 | 9.045 | 80 | 0.10 | 0.015 |
| 2-1 | 18.6 | 12.065 | 92 | 0.10 | |
| 3-1 | 24.1 | 99 | 0.24 | ||
| 3-2 | 24.7 | 17.780 | 112 | 0.12 | |
| 4-1 | 31.6 | 12.065 | 124 | 0.60 | |
| 4-2 | 17.780 | 0.50 | |||
| 4-3 | 32.4 | 23.825 | 140 | 0.38 | |
| 5-1 | 44.7 | 12.065 | 156 | 1.59 | 0.02 |
| 5-2 | 17.780 | 1.49 | |||
| 5-3 | 23.825 | 1.36 | |||
| 5-4 | 45.5 | 31.267 | 171 | 0.95 | |
| 6-1 | 63.8 | 12.065 | 218 | 3.84 | |
| 6-2 | 17.780 | 3.73 | |||
| 6-3 | 23.825 | 3.85 | |||
| 6-4 | 31.267 | 3.12 | |||
| 6-5 | 44.399 | 1.95 |