Product Details
Separate UL Emergency LED Drivers with small size
The EMB Series from Helpower is a UL Classified LED emergency driver that allows the same LED fixture to be used for both normal and emergency operation. It provides constant power output to the load during emergency mode operation. The battery is very slim, and can be used for led fixtures with internal driver, such as Wall Pack, Canopy, Vapor Tight ,etc.
Technical Parameters
Model Number |
EMBXXYY-ZZZ |
Input Power |
100mA Max. |
Input Voltage |
100-277VAC / 100-347VAC 50/60Hz |
Output Voltage |
25-50 VDC / 51-80 VDC / 81-155 VDC / 156-230 VDC |
Output Power |
12W |
Recharge Time |
24 Hours |
Discharge Time |
90 Minutes |
Battery |
Li-ion / Ni-MH |
Ambient Temp |
32°F~122°F/ 32°F~158°F |
Feathers
UL and cUL standard
Universal 100-277V, 50/60 Hz input.
Over current protection
CAUTION- Do not attempt to service the battery. A sealed, no-maitenence battery is used that is not field replaceable.
Recharge Time: 24Hrs
90mins durable emergency time
Applicable Fixtures
Suitable for lighting fixture with internal driver and be installed inside the fixture, such as LED Troffer, Wall Mount Fixtures, LED Stairwell Light, LED Troffer, etc.
Certificate
Package
The products is packaged in individul box and outer cartons.
This product should be stored in its original package and kept in a clean and dry place.
The battery better be charged 24 hours every three months during storage.
Question & Answering
Q: What's the ambient temperature of Li-ion?
A: Li-Ion: 32°F~122°F
Q: What's the working temperature of Lithium lron Phosphate Battery?
A: Lithium Phosphate Battery: 32°F~122°F
Q: How long will the battery discharge?
A: Usually 90minute, but 120 minutes and 180minutes are also optional.
Q: How about the storage? Any requirements and restrictions?
A: These are batteries, so shall be kept in a clean and dry place, better to put on a pallet. Far away from fire and gas or electric heaters.
http://www.emergencyleddriver.com/
Company Profile
